1.25 inch Heim Joint Rod End Kit, chromoly rod ends with right and left hand thread, heat treated and hard chrome plated, 2 pair set
Components of 1.25 inch Heim Joint Rod End Kit, including chromoly round tube adapters and high misalignment spacers, for steering and suspension.
1.25 inch Heim Joint Rod End Kit installed in suspension setup with chromoly rod ends and jam nuts
1.25 inch Heim Joint Rod End Kit, chromoly rod ends with right and left hand thread, heat treated, hard chrome plated, 2 pair set
1.25 inch Heim Joint Rod End Kit with chromoly rod ends, round tube adapters, misalignment spacers, and jam nuts for off-road use
Comparison of factory and upgraded 1.25 inch Heim Joint Rod End Kit with chromoly rod ends used for suspension and steering
Image showing components of a 1.25 inch Heim Joint Rod End Kit, featuring chromoly rod ends, tube adapters, spacers, and jam nuts.
Diagram of 1.25 inch Heim Joint Rod End Kit, chromoly rod ends with measurements, heat treated, chrome plated, right and left hand thread.

1.25 inch Heim Joint Rod End Kit, chromoly rod ends with right and left hand thread, heat treated and hard chrome plated, includes round tube adapters, high misalignment spacers and jam nuts for steering, suspension and panhard bars, 2 pair set

214,88 $ 340,00 $risparmi 125,12 $
SKU: VXB0FGN9ZPCN
UPC: 00193019403846





Kit di terminali a snodo Heim inch 1,2 inch per sospensioni ad alto carico
✔️ Snodi inch da 1 1/4 inch con filettatura destra e sinistra, con adattatori (2 coppie)

This 1.25 inch heim joint rod end kit is built for serious steering and suspension setups that need extreme strength, smooth articulation, and clean adjustability. It’s commonly used on panhard bars, traction bars, and custom link systems in off-road rigs, rock crawlers, and high-load performance builds.

✅ Pack size: 4 pieces total, 2 right-hand thread and 2 left-hand thread heim joints with round tube adapters, high misalignment spacers, and jam nuts
✅ Rod end bore: 1.25 inch
✅ Thread size: 1 1/4 inch with 12 TPI
✅ Material: Heat-treated alloy chromoly steel
✅ Finish: Hard chrome plated for wear and corrosion resistance
✅ Static load rating: 76000 lb
✅ High misalignment design for smooth articulation under suspension travel
✅ Grease-free construction for low maintenance
✅ Weld-ready design compatible with MIG and TIG welding
✅ Common uses: Steering links, suspension links, panhard rods, traction bars, and heavy-duty chassis connections

Dimensions
Diametro interno 1,25 inch
Dimensione filettatura 1 1/4 inch TPI
width di montaggio width ,625 inch
outer diameter del tubo outer diameter ,75 inch
Spessore della parete del tubo 0,120 inch
inner diameter del tubo inner diameter ,5 inch

💡 Why are 1.25 inch chromoly heim joints used in extreme-duty suspension and steering systems?
They’re designed to handle massive load while keeping movement smooth and controlled.

  • Large bore and shaft size increase load distribution and joint stability

  • Il cromo-molibdeno trattato termicamente resiste agli urti, alle vibrazioni e alla deformazione

  • High misalignment spacers reduce binding during full suspension travel

This heim joint kit is a handy choice when you need maximum strength, smooth articulation, and dependable performance in high-load steering and suspension applications.

Condividi
Facebook X (Twitter) Pinterest