Two In One Mini Pneumatic Chamfering Machine Featuring Hella Smooth One Handed Operation And Top Shelf 30000 Rpm Air Powered Corner Beveling Trimmer For Quick Deburring And Clean Edge Finishing

通常価格 114.95 セール価格259.00144.05の節約
UPC:





Mini 30000 RPM Pneumatic Chamfer Tool for Fast Edge Shaping
✔️ 30000 RPM speed, 1/4 inch PT inlet, fast C and R edge shaping

This mini pneumatic chamfering machine cuts away sharp burrs and bevels corners on steel, aluminum, and wood without much effort. You get smooth finish passes on straight runs, circular holes larger than 8 mm / 5/16 inch, and curved rims in busy fabrication bays. Mechanics and cabinet makers rely on it for quick prep work on car panels, laminate edging, and scrap metal in active workshops.

✅ One handed frame stays balanced while you feed the cutting disc into steep joints.
✅ Five setting airflow control trims gas draw while you lock in cut depths from 0.1 mm to 0.9 mm / 0.004 inch to 0.035 inch.
✅ Six point three five millimeter / one quarter inch PT hose connection plugs straight into most shop compressors.
✅ Replaceable C inserts grind clean metal bevels and turn round R discs handle soft laminate boards.
✅ Shielded ball bearing housing keeps coolant spray and fine grit from touching the internal spindle assembly.

💡 What maintenance steps keep a pneumatic chamfering tool handy for heavy daily machining jobs? You preserve the exact tolerances of any air powered corner beveler by pairing a compatible cutting disc with your base material thickness and flushing out residual moisture from the feed line. - Lower the throttled airflow ratio when slicing thin aluminum panels to prevent the heated steel guide from dragging across the joint - Pour three drops of accepted pneumatic compressor fluid into the intake valve each morning to coat the moving sliders and guard against oxidation - Trade out scuffed carbide chamfer plates when micro scoring begins tearing through the workpiece edge to sustain crisp trimming results across large orders

✝️